Zen transcendence and lawn mowing as a young man, I dislike grass cutting, so I defiled my pusher in the garden and became a foreign artist in Texas. My first story is about foreigners found to be lawn mowers. When I returned home again, I spent so much time in the East, and my Texas friend wanted me to move to a tall building in downtown Dallas. Instead it settled down to 16 miles south of Cedar Hill. I was surprised that we bought 8 acres of grounds.
Ideally, when the grass dries, cut grass. Cutting a wet lawn has no harm to the lawn, but the best results are not obtained. Wet grass fills the mower deck. When you cut the grass, it also tends to fall and gather. Pay attention to wet grass falling from the lawn mower. After cutting to avoid killing the grass, remove them from the lawn. Always avoid lawn mowing as there is a possibility of mowing or tearing in wet soil. If you need to mow the lawn in a wet place, spray an oil or silicone spray on the bottom of the lawn mower to prevent the lawn mower from sticking. Also make sure that your lawn mower blade is sharp to avoid removing grass clippings from the soil
After spreading the turf, it is best to wait until the new turf will start a good start before mowing lawn. When reaping height is reached, new grass seedlings can be cut for the first time, the cutting height differs from grass to grass. Whatever kind of grass you have, please do not cut one third of the blade. Dramatic harvesting can squeeze new grass plants and squeeze it, delaying the growth of new lawn. When reaping a new lawn from the grass instead of seeding, wait 2 to 3 weeks before mowing the lawn and give the lawn the opportunity to root the lawn. Lawn mowing is a good thing if you have enough strength to move to test whether you are ready to walk on lawn mowing, watering, lawn or not. (You can also check if the roots are removed by slowly pulling the draft.) Please do not cut grass of less than 2 inches in the first few times. Please pay close attention when mowing lawn. Do not raise the turf (If you moved a part, please return to the original position).