You haven't finished your engraving!

Engrave two lines of text up to 24 characters per line. Available fonts are Arial, Times, Black Chancery, and Phoenix Script. The position of the sculpture is near the handle and is the same size as the actual size of the engraving blade.

For more sophisticated designs, such as company logos, each sculpture fee plus a $ 50 temporary artwork setup fee is required. Additional scratches may be required when sculpting in a wide filled area. For details, refer to the Camera Ready Drawing Requirements section.

Set up a digital file that requires high resolution. The file must be in either Jpeg (.jpg), Adobe Illustrator (.ai), EPS, or PDF format.

I do not believe that copy, business card, fax, letterhead, or other stamped products are artwork created by the camera. Our art department can use these projects to create finished pieces at an additional $ 50 per hour.

Before proceeding, it is necessary to complete the digital model provided by SOG and to confirm the appearance and position of the custom sculpture. If you have any questions about the validity of the file format, please contact us at retail@sogknives.com.

We accept most sculpture requirements, but we can not respect each one. It may include terms that are not permitted to use our company 's trademarks and other products.

Others may contain material that you think is inappropriate or that you do not intend to attach to the product. Sometimes this forces us to reject sculpture requests, otherwise these requests will not be able to dispute. If your sculpture request is considered unacceptable, your order will be canceled, and you will receive an email notification

Every effort is made to satisfy the desired color (dark or light marking). However, the color result will vary with material and coating changes

For official time estimates and estimates, please contact SOG Consumer Service at 888-405-6433 x 240.

All products stamped by SOG still have a complete SOG guarantee. This does not include abuse, abuse, inappropriate use. For details of the warranty, please see the warranty page. Items replaced or repaired during the warranty period will not be engraved again.

SOG Knives assumes that you have the right to use the trademarks and copyrighted work submitted to us for copying. You assume all liability arising out of the trademark or copyright dispute.

Sculpture is an important process among book illustrations. In the 19th century, the steel sculpture was replaced by a block of hardwood carved gradually and then it could be fixed directly to the metal chase of the metal type. In famous wood carvings there are Thomas Bewick (1753-1828), George (1815-1902), Edward (1817-1905) Dargiel. They are working on illustration of the biggest Victorian book in the UK.

Until the middle of the 19th century, sculpture (also known as copperplate engraving or line carving) has been widespread as a way of copying art images on paper and illustrations of books and magazines. Since then, it has almost completely been replaced by etching and other techniques. When the drawing line is cut from copper, the board is inked. Then wipe the surface clean and leave only the incision containing the ink. The plate is then placed in a press with a piece of paper. The paper receives the impression of ink from the groove and completes printing

Engraving is a process that requires cutting a design on a sheet made of relatively hard material. This is an ancient technology that requires extensive skills and experience. The finished board is usually covered with ink, after which the ink is removed from all unetched parts of the board. The sheet is then pressed into paper under considerable pressure. As a result, it becomes a design that is slightly swollen up on the surface of the paper and covered with ink. Because of the cost of process and expertise required, many consumers choose thermal printing, but this is a way to produce similar raised printing surfaces, but in a different way at a lower cost.