Wind chime wind chime gives a clear and pure sound when hitting a raft or a hanging clapper. Wind chimes usually consist of a set of individual alloy rods that are adjusted to a series of intervals whose length is considered pleasing. Since these are suspended from the designed frame, the cleat suspended at the center can reach all the rods and hits. When the wind blows, the clapper starts moving, randomly hits one or more suspended rods - vibrate the rod to make a tone.
Let me first say I was not raised in the backyard of my house (or the wind rings the chime in my neighbor 's garden). I had not trained wind chimes or wind bells in the early days. My family is more practical in the way we decorate our trees - we have a clear fishing line on the metal piece of a cola can of an empty meal. Then we wrap the bottle around the pine branches and shoot our bb gun 20 or 30 feet away from the rear deck. The person I first heard said he likes wind chimes. I made a psychological record and I have not believed him any longer. The second American colleague I asked said he would also take a gun. The third person I asked happened to be a Canadian, but I was not joking about pouring maple syrup into wind chimes. The fourth person I heard from Turkey said he sneaked into the night secretly and pour the superglue into the noise polluter.
When the wind chime is hit, the wind chime creates a distinct and pure tone. Wind chimes usually consist of a set of individual alloy rods that are adjusted to a series of intervals whose length is considered pleasing. Since these are suspended from the designed frame, the cleat suspended at the center can reach all the rods and hits. When the wind blows, the clapper starts moving, randomly hits one or more suspended rods - vibrate the rod to make a tone. The height of the sound is determined by the length of the rod, but the perceived loudness is affected by many factors. Clapper effect, alloy density and structure, wind speed and direction (to mention a few examples). Also, it affects loudness that there is no hard cavity between the cavity or the rod and the frame.