What is the Difference Between AC and DC

What is it now? First of all, what is it now? Current is expressed in units called ampere. The current represents the amount of electrons passing through in 1 second. That is, a 40 coulomb wire passing through any point within 2 seconds is said to have a current of 20 amperes (charge unit given by 24 x 1018 electrons) / hour (seconds). In this case, 2 seconds ampere is also called coulomb per second Another trick about current is to be measured with positive charge motion.

The difference between AC current and DC current is explained in detail in this article. I want to clearly understand the differences between AC and DC and their characteristics in AC, DC, waveform, equation, table column. Still can not understand the topic of this article or implement the latest electric project. Please ask the question in the comment box below. This is a question, what is the power factor of AC?

The current is the flow of charged particles, or in particular the flow of electrons in the case of AC and DC. According to Karl K. Berggren, Professor of Electrical Engineering at the Massachusetts Institute of Technology, the fundamental difference between AC and DC is the direction of flow. DC is constant and moves in one direction. "A simple way to visualize the difference is when the current is drawn like a flat line and the alternating current on the pattern creates a sinusoidal or wavy pattern," says Berggren. "As AC varies over time with repetitive oscillations - the rising curve shows current flowing in the positive direction and the falling curve shows the alternating current period in which the current moves in the negative direction, this is the name of AC . "

One difference between AC power and DC power is that AC is bidirectional AC current and DC is current flowing in only one direction. The wires outside the residence are connected to the alternator at both ends, but the batteries and the solar cells are direct current. It is not necessary to wire the DC power supply. Binary is a way of expressing numbers using only the numbers 0 and 1. Each number in the binary system has only two digits. The decimal system represents ten possible numbers of systems. All numbers used in decimal notation are combinations of numbers from 0 to 9. All decimal digits are a 10 digit combination