Using the Bitumen in the Alberta Tar Sands

In the current situation, the best way to use large quantities of bitumen with Alberta's tar sands pipeline is included. Currently there are relatively few pipelines in British Columbia and there is a major route between Taylor and Kamloops. The main new problem that has been discussed for a while is whether to establish the northern portal project. Enbridge Inc. is a major oil and gas pipeline operator throughout North America and plans to construct a pipeline. From BC's Kitimat to AB Brudenheim, we are planning to build a double pipeline of about 1,177 kilometers.

Athabasca Oil Sands (or Tar Sands) is a large amount of bitumen or very heavy crude oil located in the northeastern part of Alberta, Canada, concentrated in Fort McMurray, an emerging city. These oil sands are mainly in the McMurray layer and consist of a mixture of coarse bitumen (semisolid crude), quartz sand, clay mineral, water. The Athabasca deposit is the world's largest known crude oil bitumen reservoir, the largest of the three largest oil sands deposits in Alberta, and the nearby Peace River and Cold Lake deposits (the latter covering Saskatchewan) is there. Wenzhou)

Tar sands (also called oil sands) are mixtures of clay, sand, water and bitumen, and are dark black viscous oils. You can mineralize and process tar sands, extract oil-rich bitumen, and refine it to petroleum. Bitumen in tar sands can not be extracted from the ground in its natural state; instead, tar sands deposits are generally mined using strip mining or open pit technique Tar sands are mined and processed Then, it generates oil similar to oil extracted from conventional well, but extracting oil from tar sands is more complicated than conventional oil recovery. The oil sand recovery process involves an extraction and separation system for separating the bitumen from clay, sand and water making up the tar sands. Further improvement is required for asphalt to refine. Because it is highly viscous (dense), it must also be diluted with light hydrocarbons so that it can be transported by pipes.