SteelStik Epoxy Putty Stick

SteelStik is a hand-mixed, reinforced, rust-resistant epoxy paste that quickly repairs or rebuilds any metal products. After mixing, it can be shaped into shapes or form industrial strength polymer compounds which can be used to build, repair and repair steel parts. SteelStik is completed in 3 to 5 minutes and you can drill, tap, machine, grind, bowl and paint after 60 minutes. SteelStik cures to dark gray with a tensile strength of 900 PSI and can withstand temperatures up to 300 ° F.

The epoxy resin is divided into two parts, a resin and a catalyst, which react chemically when mixed together. This makes the filling gap very good as it becomes a solid mass. The curing time of the epoxy resin ranges from several minutes to one hour and can be used as a double syringe syringe, tube or putty. Mix the aliquot of adhesive with a clean plastic knife or ice candy bar and quickly paint before the time is fixed. After curing, the epoxy can be drilled, sanded or painted. These adhesive aerosol cans do not penetrate porous materials such as liquid adhesives, so they are ideal for bonding paper or cloth. When using, wait a few minutes until you become sticky by spraying the coating on the surface before pasting paper or cloth. In order to achieve a stronger bond, first spray the adhesive on both sides.

SteelStik is a hand-mixed, reinforced, rust-resistant epoxy paste that quickly repairs or rebuilds any metal products. After mixing, it can be shaped into shapes or form industrial strength polymer compounds which can be used to build, repair and repair steel parts. SteelStik is completed in 3 to 5 minutes and you can drill, tap, machine, grind, bowl and paint after 60 minutes. SteelStik cures to dark gray with a tensile strength of 900 PSI and can withstand temperatures up to 300 ° F.

After preparing the adhesive with the help of a putty knife, apply any desired amount of adhesive or epoxy to the bottom of the memorial vase. When you install a vase in a vase it must completely cover the space between the vase and the granite surface and make sure it does not leak excessively from the side of the vase. Push or paste the vase with the weight so that the adhesive is evenly distributed between the granite memorial vase and the surface. Please use a straight razor blade and a wet wipe to wipe excess adhesive or epoxy from the bottom of the granite vase