Dangers of Electrical Shock and Safety Measures for Prevention

Electric shock is caused by these leakage currents in the body. Leakage current is defined as the current supply loss of the line feeder, which is normally broken. Or, in other words, the leakage current is an unnecessary current which leaks from the defective power line due to some wear or misuse. Hazardous use of line-powered equipment can be dangerous. If it has sufficient amplitude and duration, leakage of AC current in the body (ie 60 Hz) can cause depolarization of the motor nerve and cause unintentional tonic muscle contraction.

GFCI protects you from electric shock or electric shock if the device is in contact with water (or if you feel a surge). Since GFCI measures the amount of current from hot to neutral, the circuit trips when an imbalance occurs. Normally, GFCI can detect small changes as small as 4 mA and immediately shut off the current. To test the earth leakage circuit breaker (GFCI), just plug the light or other device into the power outlet and press the test button. A quick sound will be heard, the socket will fall and the two plugs will turn off. If the lamp goes out, you can see that the socket is not functioning and the security mechanism is functioning correctly. After confirming that GFCI is functioning properly, press the reset button and open the socket again.

To prevent the risk of electric shock and the possibility of electric shock, the ground fault interruption device detects the open ground of the connected electric or electronic device. When an open area is detected, G. The device immediately turns on the device. G.F.I. Equipment is similar to a circuit breaker, but it is designed to protect people, not circuit parts

The circuit breaker helps control the power supply in the house. When the current is overloaded, the circuit breaker shuts off the power. This helps to ensure home safety by preventing fire. It also protects against burnout of electrical wires and damage to electrical equipment and electrical appliances. These circuit breakers remain in the circuit breaker box. Most families are kept in the basement and laundry. To install the circuit breaker, you must do it with the help of an expert familiar with how to install the circuit breaker. If the circuit breaker is continuously electrically disconnected and disconnected, it indicates that there is a problem with the circuit breaker and repair and repair is necessary. Ignoring this problem is a safety hazard. If it gets hot when the circuit breaker is in contact, it should be inspected and repaired immediately. Circuit breaker test with multimeter